Annoyances.org
Home » Troubleshooting » Article 07-003 Search | Help | Home
  
Tip: Run a free scan for common Windows errors ad

Resolving Hardware Conflicts

Intended For
Windows Vista
Windows XP
Windows 2003
Windows 2000
Windows Me
Windows 98
Windows 95
A hardware conflict occurs when two devices try to use the same hardwrae resource, such as an IRQ or memory address. The telltale signs of a conflict is either a particular device not working, or your system hanging or crashing every time you try to use a specific device. Nearly all devices made since 1996 are Plug-&-Play (PnP), meaning that they adjust these settings automatically to avoid conflicts. The more PnP devices you have, the less likely you are to experience a conflict. (For non-PnP devices, resources are assigned by setting jumpers or switches on the device itself, or by using special drivers or software.) So, what remains is trying to resolve conflicts between non-PnP (Legacy) devices; here is a general attack strategy for this type of problem:
  • 1.) Open the Device Manager, select System from the top of the list, and click Properties. Windows tries to list all your resources, and which ones are being used by which devices.
  • 2.) From here, you should be able to determine if there is a conflict, and which devices are causing it. Now, it's only a matter of reconfiguring one or more of the devices so that the conflict is eliminated (refer to the specific device's manual for information on changing its settings). If you can't find the cause of the problem here, continue to step 3.
  • 3.) Remove or disconnect all unnecessary devices (sound cards, CD-ROMs) from your computer, except for the one that isn't working (if applicable). If the device still doesn't work, either it's broken, it's a driver problem (see below), or the conflict is with a key piece of hardware (such as the motherboard or video card).
  • 4.) If the problem seems to have been fixed, start adding devices one-by-one, until the problem reappears. You've now isolated the culprit, and it's now only a matter of reconfiguring that device so that the conflict is eliminated (refer to the specific device's manual for information on changing its settings).
  • 5.) Note that drivers can cause problems, too. See the next section for more information.


Written by: Annoyances.org
Last updated: Wednesday, February 7, 2007

Care to discuss this article with other Windows users? Select your operating system here, and click Continue to post your question.

Previous discussions about this article:
(open a message to see applicable responses, if any)

Return to "Troubleshooting"


All content at Annoyances.org is Copyright © 1995-2010 Creative Elementtm All rights reserved.
Please do not plagiarize; redistributing these pages without permission is strictly prohibited.